Incubator IF750plus

The IF750plus incubator is optimally designed for forced air circulation and the fan can be switched off completely if desired. Your valuable products are warmed very carefully. It is at home everywhere in the world of research, medicine, pharmaceuticals, and food chemistry. Two High Definition TFT Color Displays.

SKU: IF750plus Categories: , Tags: , ,


Incubator IF750plus Control of standard components

ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Temperature 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days


Set temperature range in °C min. 5°C above ambient up to +80°C
resolution of display for
setpoint and actual temperature values

Control technology

adjustable parameters temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Function HeatBALANCE adapting the distribution of the heating performance of the upper and lower heating circuit from -50% to +50%
Sterilization fixed sterilization program (4 hours/160°C) for sterilization of working chamber, not for sterilizing the load
Function SetpointWAIT the process time does not start until the set temperature is reached
Language setting German/English/Spanish/French
Calibration three freely selectable temperature values


Fan forced air circulation by 2 quiet air turbines in 10% steps for each segment individually
Fresh air admixture adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment individually
Vent vent connection with restrictor flap


Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
Documentation program stored in case of power failure


Alarm Audible and visual
Temperature control overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY additionally integrated over- and undertemperature monitor “ASF”, automatically following the set point value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
Temperature Control mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above temperature
Autodiagnostic system for fault analysis

Standard equipment

Door fully insulated stainless steel doors with 2-point locking (compression door lock)
Door inner glass doors
Installation on lockable casters
Internals 2 stainless steel grids
Scope of delivery incl. works calibration certificate for +37°C
Housing rear zinc-plated steel
Interior easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides

Stainless steel interior

w x h x d : 40.9” x 47.2” x 23.6”
Volume 749 I
Max. loading of chamber: 661 Ibs

Textured stainless steel casing

w x h x d : 48.2” x 67.9” x 30.9”

Electrical data

230 V (+/- 10%), 50/60 Hz / approx. 8.7 amps
115 V (+/- 10%), 50/60 Hz / approx. 15.6 amps

Incubator IF750plus Packing/shipping data

the appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx. incl. carton B x H x T: 52.4” x 56.7” x 41.3”
Net weight approx.474 Ibs
Gross weight carton approx. 635 Ibs

Additional information

Weight 474 lbs
Dimensions 52.4 × 75.2 × 41.3 in