Incubator IF750
The IF750 incubator is optimally designed for forced air circulation and the fan can be switched off completely if desired. Your valuable products are warmed very carefully. It is at home everywhere in the world of research, medicine, pharmaceuticals, and food chemistry.
Description
Incubator IF750 Control of standard components
| ControlCOCKPIT | adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display |
|---|---|
| Temperature | 1 Pt100 sensor Class A in 4-wire-circuit |
| Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
Temperature
| Set temperature range in °C | min. 5°C above ambient up to +80°C |
|---|---|
| resolution of display for setpoint and actual temperature values | 0.1°C |
Control technology
| adjustable parameters | temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time |
|---|---|
| Function SetpointWAIT | the process time does not start until the set temperature is reached |
| Language setting | German/English/Spanish/French |
| Calibration | three freely selectable temperature values |
Ventilation
| Fan | forced air circulation by 2 quiet air turbines, adjustable inn 10% steps |
|---|---|
| Fresh air admixture | adjustment of pre-heated fresh air admixture by air flap control in 10% steps |
| Vent | vent connection with restrictor flap |
Commmunication
| Programming | AtmoCONTROL software for reading out, managing and organizing the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). |
|---|---|
| Documentation | program stored in case of power failure |
Safety
| Temperature control | adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating aprrox. 20°C above nominal temperature |
|---|---|
| Autodiagnostic system | for fault analysis |
Standard equipment
| Door | fully insulated stainless steel doors with 2-point locking (compression door lock) |
|---|---|
| Door | inner glass doors |
| Installation | on lockable casters |
| Internals | 2 stainless steel grids |
| Scope of delivery | incl. works calibration certificate for +37°C |
| Housing | rear zinc-plated steel |
| Interior | easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
Stainless steel interior
| w x h x d : 40.9” x 47.2” x 23.6” | |
| Volume 749 I | |
| Max. loading of chamber: 661 Ibs |
Textured stainless steel casing
| w x h x d : 48.2” x 67.9” x 30.9” |
Electrical data
| 230 V (+/- 10%), 50/60 Hz / approx. 8.7 amps | |
| 115 V (+/- 10%), 50/60 Hz / approx. 15.6 amps |
Incubator IF750 Packing/shipping data
| the appliances must be transported upright | |
|---|---|
| Customs tariff number | 8419 8998 |
| Country of origin | Federal Republic of Germany |
| WEEE-Reg.-No. | DE 66812464 |
| Dimensions approx. incl. carton B x H x T: 52.4” x 75.2” x 41.3” | |
| Net weight approx.474 Ibs | |
| Gross weight carton approx. 635 Ibs |
Additional information
| Weight | 474 lbs |
|---|---|
| Dimensions | 52.4 × 75.2 × 41.3 in |
