Description
Incubator IN450plus Control of standard components
ControlCOCKPIT | adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays |
---|---|
Temperature | 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value |
Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
Temperature
Set temperature range in °C | min. 5°C above ambient up to +80°C |
---|---|
resolution of display for setpoint and actual temperature values |
0.1°C |
Control technology
adjustable parameters | temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time |
---|---|
Function HeatBALANCE | adapting the distribution of the heating performance of the upper and lower heating circuit from -50% to +50% |
Sterilization | fixed sterilization program (4 hours/160°C) for sterilization of working chamber, not for sterilizing the load |
Function SetpointWAIT | the process time does not start until the set temperature is reached |
Language setting | German/English/Spanish/French |
Calibration | three freely selectable temperature values |
Ventilation
natural convection | |
---|---|
Fresh air admixture | adjustment of pre-heated fresh air admixture by air flap control in 10% steps |
Vent | vent connection with restrictor flap |
Commmunication
Programming | AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port |
---|---|
Documentation | program stored in case of power failure |
Safety
Alarm | Audible and visual |
---|---|
Temperature control | overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display |
AutoSAFETY | additionally integrated over- and undertemperature monitor “ASF”, automatically following the set point value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature |
Temperature Control | mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above temperature |
Autodiagnostic system | for fault analysis |
Standard equipment
Door | fully insulated stainless steel doors with 2-point locking (compression door lock) |
---|---|
Door | inner glass doors |
Installation | on lockable casters |
Internals | 2 stainless steel grids |
Scope of delivery | incl. works calibration certificate for +37°C |
Housing | rear zinc-plated steel |
Interior | easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
Stainless steel interior
w x h x d : 40.9” x 28.4” x 23.6” | |
Volume 449 I | |
Max. loading of chamber: 661 Ibs |
Textured stainless steel casing
w x h x d : 48.2” x 49.1” x 30.9” |
Electrical data
230 V (+/- 10%), 50/60 Hz / approx. 7.8 amps | |
115 V (+/- 10%), 50/60 Hz / approx. 13.0 amps |
Incubator IN450plus Packing/shipping data
the appliances must be transported upright | |
---|---|
Customs tariff number | 8419 8998 |
Country of origin | Federal Republic of Germany |
WEEE-Reg.-No. | DE 66812464 |
Dimensions approx. incl. carton B x H x T: 52.4” x 56.7” x 41.3” | |
Net weight approx.355 Ibs | |
Gross weight carton approx. 501 Ibs |