Peltier-cooled Incubator IPP1400eco

The Memmert single display, compressor cooled IPP1400eco Incubator is recommended for large volumes in conjunction with rapid temperature changes. Peltier technology provides seamless heating and cooling within a single system, reducing operating costs.

Let us help you build the perfect Incubator. Contact us for customization options and pricing.

Description

Peltier-cooled Incubator IPP1400eco

Temperature

Working temperature range in °C	from +15 (at least 10 below ambient temperature) to +60°C
Temperature	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error

Control technology

ControlCOCKPIT	SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Language setting	German, English, Spanish, French, Polish, Czech, Hungarian
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function HeatBALANCE	adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %
Function SetpointWAIT	the process time does not start until the set temperature is reached
Calibration	three freely selectable temperature values
adjustable parameters	temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, summertime/wintertime

Ventilation

Fan	forced air circulation by 2 quiet air turbines, adjustable in 10 % steps for each segment individually
Fresh air admixture	adjustment of pre-heated fresh air admixture by air flap control in 10 % steps for each segment individually
Vent	vent connection with restrictor flap

Communication

Documentation	program stored in case of power failure
Programming	AtmoCONTROL software for reading out, managing and organizing the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

Safety

Temperature control	adjustable electronic overtemperature monitor
Autodiagnostic system	for fault analysis

Standard equipment

Internals	4 stainless steel grid(s), electropolished
Works calibration certificate	or +25 °C and +40 °C
Door	fully insulated stainless steel doors with 2-point locking (compression door lock)