Incubator IN450

The incubator IN450 is perfectly designed for natural convection and your valuable chamber loads are treated very carefully. This incubator can be found everywhere in the world of research, medicine, pharmaceuticals, and food chemistry.

SKU: IN450 Categories: , Tag:


Incubator IN450 Control of standard components

ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Temperature 1 Pt100 sensor DIN class A in 4-wire-circuit
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days


Set temperature range in °C min. 5°C above ambient up to +80°C
resolution of display for
setpoint and actual temperature values

Control technology

adjustable parameters temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Function SetpointWAIT the process time does not start until the set temperature is reached
Language setting German/English/Spanish/French
Calibration three freely selectable temperature values


natural convection
Fresh air admixture adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent vent connection with restrictor flap


Programming AtmoCONTROL software for reading out, managing and organizing the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Documentation program stored in case of power failure
AutoSAFETY additionally integrated over- and undertemperature monitor “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature


Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system for fault analysis

Standard equipment

Door fully insulated stainless steel doors with 2-point locking (compression door lock)
Door inner glass doors
Installation on lockable casters
Internals 2 stainless steel grids
Scope of delivery incl. works calibration certificate for +37°C
Housing rear zinc-plated steel
Interior easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides

Stainless steel interior

w x h x d : 40.9” x 28.4” x 23.6”
Volume 449 I
Max. loading of chamber: 661 Ibs

Textured stainless steel casing

w x h x d : 48.2” x 49.1” x 30.9”

Electrical data

230 V (+/- 10%), 50/60 Hz / approx. 7.8 amps
115 V (+/- 10%), 50/60 Hz / approx. 13.0 amps

Incubator IN450 Packing/shipping data

the appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx. incl. carton B x H x T: 52.4” x 56.7” x 41.3”
Net weight approx.355 Ibs
Gross weight carton approx. 501 Ibs

Additional information

Weight 355 lbs
Dimensions 52.4 × 56.7 × 41.3 in