Constant Climate Chamber HPP1060eco

HPP1060eco – Let us help you build the perfect climate chamber. Contact us for customization options and pricing.

SKU: HPP1060eco Categories: , Tag:


Constant Climate Chamber HPP1060eco


Working temperature range Without humidity: from 0°C (at least 20°C below ambient) to 70°C
Working temperature range With humidity: from 5°C (at least 20°C below ambient) to 70°C
Setting resolution temperature 0.1°C
Temperature sensor 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value


Setting range humidity 10 – 90 % rh
Setting resolution humidity 0.5 %
Humidity humidity supply with distilled water from external tank by self-priming pump
Humidification humidification by hot steam generator
Dehumidification dehumidification by cold trap using the Peltier technology

Control technology

ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language setting German, English, Spanish, French, Polish, Czech, Hungarian
adjustable parameters temperature (Celsius or Fahrenheit), relative humidity, program time, time zones, summertime/wintertime
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function HeatBALANCE adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to 50 %
Function SetpointWAIT the process time does not start until the set temperature is reached
Calibration three freely selectable temperature values, 2-point calibration for humidity: 20 and 90 % rh


Interface Ethernet LAN, USB
Documentation program stored in case of power failure
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port


Temperature control over- and under temperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY additionally integrated over- and under temperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or under temperature, heating function is switched off in case of overtemperature, cooling function in case of under temperature
Autodiagnostic system integral fault diagnostics for temperature and humidity control
Alarm visual and acoustic

Heating concept

Peltier energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)

Standard equipment

Works calibration certificate for 25 °C/40 % rh and 40 °C/75 % rh
Internals 2 stainless steel grid(s), electropolished
Door Stainless steel doors with glass sectors, fully heated inner glass panes integrated in the full-sight glass door with 2-point locking (compression door lock)
Standard accessories Water tank including connection hose (110-750: 2.5 liter, 1060-2200: 10 liter)

Stainless steel interior

Volume 1060 l / 37.4 cu. Ft.
Dimensions W x H x D in mm w(A) x h(B) x d(C): 1040 x 1200 x 850 mm (d less 1.3” for fan – Peltier)
Max. number of internals 14
Max. loading of chamber 440 lbs
Max. loading per internal 44 lbs

Textured stainless steel casing

Installation on lockable castors
Dimensions w(D) x h(E) x d(F): 48.2 x 67.7 x 39.6 inches (d +2.2” door handle)
Housing rear zinc-plated steel

Electrical data

Voltage Electrical load 230 V, 50/60 Hz
approx. 6.1 amps @ 230 V
Voltage Electrical load 115 V, 50/60 Hz
approx. 12.2 amps @ 115 V

Ambient conditions

Set Up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Ambient temperature 16 ºC to 40 ºC
Humidity rh max. 70 %, non-condensing
Altitude of installation max. 2,000 m above sea level
Overvoltage category II
Pollution degree 2

Packing/shipping data

Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton B x H x T: 54 x 78 x 52 inches
Net weight approx. 574 lbs
Gross weight carton approx. 935 lbs

Additional information

Weight 935 lbs
Dimensions 45 × 48 × 65 in