CO2 Incubator ICO240


Let us help you build the perfect COIncubator. Contact us for customization options and pricing.

SKU: ICO240med Categories: , Tags: ,


CO2 Incubator ICO240


Working-temperature range 5 °C above ambient temperature up to 50 °C
Standard sterilization programme: 60 minutes at 180°C (without removing the sensors)
Setting temperature range 18 to 50 °C
Setting accuracy temperature 0.1 °C
Temperature 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value


Setting range active humidity control 40 to 97 % rh and rh-Off
Setting accuracy humidity 0.5 % rh
Humidity control (standard) Humidity limitation thanks to a Peltier element; when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh /- 2.5 %
Addtional humidity control (standard) Capacitive humidity sensor for measuring and displaying the relative humidity (regular Option K6 – free of charge until 31st Dec 2017)

Control of standard components

CO2 control Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
Adjustment range CO2 0 to 20 % CO2
Setting accuracy CO2 0,1%
Variation in time CO2 /- 0.2 % CO2
Adjustment range O2 1 to 20 % O2
Setting accuracy O2 0.1 % O2

Control technology

ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language setting German, English, Spanish, French, Polish, Czech, Hungarian
Function SetpointWAIT the process time does not start until the set temperature is reached
adjustable parameters temperature (Celsius or Fahrenheit), fan speed, CO2, programme time, time zones, summertime/wintertime


Interface Ethernet LAN, USB
Documentation programme stored in case of power failure
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port


Autodiagnostic system integral fault diagnostics for temperature, CO2 and humidity limit control
Alarm visual and acoustic

Heating concept

6 sides large-area multi-function heating system on four sides with additional door and back heating to avoid condensation

Standard equipment

Internals 2 perforated stainless steel shelf/shelves
Internals 1 stainless steel water dish
Door fully insulated stainless steel door with 2-point locking (compression door lock)
Door inner glass door with opening (8 mm Ø) to take gas sample

Stainless steel interior

Interior material 1.4301 (ASTM 304), corrosion resistant
Volume 241 l
Dimensions W x H x D in mm w(A) x h(B) x d(C): 600 x 810 x 500 mm
Max. number of internals 12
Max. loading of chamber 140 kg
Max. loading per internal 15 kg

Textured stainless steel casing

Dimensions w(D) x h(E) x d(F): 759 x 1176 x 691 mm
Housing rear zinc-plated steel

Electrical data

Voltage Electrical load 230 V, 50/60 Hz
approx. 2000 W
Voltage Electrical load 115 V, 50/60 Hz
approx. 2000 W

Ambient conditions

Set Up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Ambient temperature 10 °C to 35 °C
Humidity rh max. 70 %, non-condensing
Altitude of installation max. 2,000 m above sea level
Overvoltage category II
Pollution degree 2

Packing/shipping data

Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton B x H x T: 840 x 1360 x 900 mm
Net weight approx. 110 kg
Gross weight carton approx. 145 kg

Additional information

Weight 319 lbs
Dimensions 27 × 30 × 46 in
TOP Wisconsin Oven Distributors
Help-Desk Wisconsin Oven Distributors